smbpasswd -a root smbpasswd -a pi. This gives the ability to run commands as root when preceded by sudo , and to switch to the root user with sudo su . By default your raspberry pi pi comes with an account 'pi' with the password 'raspberry'. After you power off the Pi, remove the SD card from it. By default, the administrator – or super user – is called “pi,” and the password is “raspberry.” Obviously, this is very insecure as it means that anybody with malicious intentions who has physical (or network) access to the machine can run rampant.So the first thing you need to do is create a new (sudo) user. There are a couple of different ways to change the default username but I found the following method the easiest. Step 2. Without it, we won’t be able to make a connection to the shared network drive. This page details how to setup network file sharing using Samba on your Raspberry Pi to enable you to share files with Windows or OSX computers on your network using the SMB protocol.

In this example, we will be creating a Samba user called “pi” with the password set to “raspberry“. You can list current samba users with the command pdbedit. By default, a TDB database is used to store this information. A user must have a password in samba to access shares.

The above commands add root and pi as samba users. sudo smbpasswd -a pi. Get the SD Card.

Finally, let’s restart Samba:

Step 1: Open a terminal window and at the command prompt run this code to install Samba and Samba common. Run the … Before we start the server, you’ll want to set a Samba password - this is not the same as your standard default password (raspberry), but there’s no harm in reusing this if you want to, as this is a low-security, local network project.

sudo apt-get install samba samba-common-bin. Now, attach the card to your … Enter the following command into the terminal (replacing “rob” with the username you would like to use):Your super user n… For security reasons it's probably a good idea to change the password, but you may also wish to change the username as well.

Next, we need to set up a user for our Samba share on the Raspberry Pi.

pdbedit -L (Optional) If you don’t want to share all folders and files in the Raspberry Pi, you can create a shared … Using the command smbpasswd as the root user we can add new samba users. The default pi user on Raspberry Pi OS is a member of the sudo group.

Then set a password as prompted. To add a new user to the sudo group, use the adduser command: