Xarec NWA Grades Reinforced Nylon 66 with low warp high performance alloy ! Our Price: $302.50 USD. usually suitable for molding glass-reinforced nylon resins. Polyamides or nylons are among the most important technical thermoplastics. Under repeated shock, glass-fiber reinforced NylonG 3D prints maintain their shape and structural integrity.

A glass-fiber filler makes these naturally slippery, wear-resistant sheets more rigid than standard Delrin® acetal resin sheets. as glass filled PA66 or glass filled PBT, are typically selected because they offer specific properties such as chemical or high ... Materials which offer reduced warp without compromising the properties and value of semi-crystalline resins. They resist expanding when exposed to heat and moisture resistant, so they can be machined to close tolerances. Ensinger offers glass filled nylons to meet the specific needs of the different areas of application. Delrin® acetal resin is also known as acetal homopolymer. Re: Glass filled Nylon resin -- what size are the glass beads?

30% glass filled nylon has 200% better strength than general purpose nylon but it is highly abrasive and will abraid or gall mating surfaces. The availability of ASHLENE® Nylon resins extends far beyond the basic products highlighted on these pages. Use them to make manifolds, impellers, and other parts that require rigidity. All of these resins can be supplied pre colored or otherwise modified.
It is used to manufacture a wide range of structural components by injection or compression moulding.

The problem can actually get worse once the process switches over to the second stage of injection.
The addition of glass fibers also affects the molding process.

This … Further, there are subtleties that the molder must consider. Glass filled nylon is stronger, but not "stupid strong".

Glass-filled polymer (or glass-filled plastic), is a mouldable composite material.It comprises short glass fibers in a matrix of a polymer material. For nylon it is usually quoted as below 0.20%; most other moisture-sensitive resins need to be below 0.02%. At high output rates, screw designs as shown in Table 2 will provide better uniformity of melt temperature and freedom from unmelt. They also include Nylons 11, 12 and 610. It is an ideal glass alternative that offers design flexibility, chemical, durability, and chemical and shatter resistance.

Nylon is a common thermoplastic resin typically used for injection molding applications.This material is a direct equivalent to Dupont Zytel* 70G33L. Figure 3 shows the relationship of melt viscosity to moisture content in a 33% glass-filled nylon when the measurement is made at a shear rate of 10 sec-1. A fiber is a strand that is equal to the length of the pellet.