A360 is an aluminum alloy with excellent pressure tightness and fluidity. Please click here if you are a supplier and would like information on how to add your listing to this material. 2.It exhibits excellent fluidity, pressure tightness, and resistance to hot cracking Key Words: Aluminium A380.0-F; UNS A13800; AAA380.0-F Die; AlA380.0-F: Vendors: No vendors are listed for this material. Aluminum Die Casting Alloy A380 is one of the most commonly specified aluminum alloys with a number of significant benefits: It offers the best combination of casting, mechanical, and thermal properties It exhibits excellent fluidity, pressure tightness, and resistance to hot cracking Aluminum Die Casting Alloy A380 Aluminum Die Casting Alloy A380. A380 Die Cast Aluminum Properties A380 die-cast aluminum alloyis the most common special aluminum alloy because it combines easy casting mold, easy machining, good heat conduction, and other characteristics. A380 Aluminum Alloy Typical Uses and Properties - Rheocast Company (262) 251-4942 A380 is one of the most common specified aluminum alloys with a number of significant benefits: 1.It offers the best combination of casting, mechanical, and thermal properties.

Aluminum A380.0-F Die Casting Alloy ... Notes: Composition information provided by the Aluminum Association and is not for design. It has a high silicon content and offers high corrision resistance as well as high strength, even in elevated temperatures. A380 is one of the most commonly specified aluminum alloys with a number of significant benefits. Aluminum is stronger pound for pound than most other alloys, yet a lower cost per part due to low weight.

A380 aluminum alloy is widely used for producing die castings. It has exceptional mechanical properties and is used in hundreds of applications such as air brake castings, gear cases, and air-cooled cylinder heads. A380-Aluminum-Alloy / Die Cast Aluminium Alloy A380 properties Die Cast Aluminium Alloy A380 properties Aluminium alloy materials in Cold Chamber die castings company are 3 materials: aluminium silicon alloy, aluminium copper silicon alloy, and aluminium magnesium alloy;

Available Properties; Density; Hardness, Brinell; Tensile Strength, Ultimate; Tensile Strength, Yield; Elongation at Break, in 50 mm; Tensile Modulus, Compressive modulus in is typically about 2% higher for Al alloys ; Poissons Ratio; Fatigue Strength, Notch Status unknown, R.R. Variable mobility, pressure bearing, and high temperature split resistance are very strong. Alloy A380 (ANSI/AA A380.0) is by far the most widely cast of the aluminum die casting alloys, o˚ering the best combination of material properties and ease of …